Mini Nylon Blade Fuse, 1–30A, 32V DC
TONFUL Mini Nylon Blade Fuse products provide replaceable overcurrent protection in a compact plug-in format. The ADMIN-NL1 series offers ten ratings from 1A to 30A, a 32V DC rating and color-coded nylon housings.
For compatible mini blade fuse holders, OEM procurement and distributor assortments.
Send your requirements, we will quote for you within 12 hours
Tel:+8613655777486
Why Choose TONFUL Mini Nylon Blade Fuses?
The ADMIN-NL1 series combines a mini-size blade footprint with nylon housings and ten current options. It is distinct from standard-size nylon fuses and low-profile flat-foot fuses. Check the holder drawing before selection.
Mini Blade Format
An 11.13 mm-wide housing fits compatible mini-size fuse holders.
Nylon Housing
The supplied catalog specifies nylon for this series.
Ten Current Ratings
Options span 1A to 30A, including 7.5A.
32V DC Rating
For compatible low-voltage DC circuits within the rated voltage.
Color Identification
Catalog-defined colors support rating and assortment identification.
Bulk Procurement
Request samples, rating assortments and packaging for your order.
Technical Specifications
Values below follow the supplied TONFUL catalog. Confirm the current datasheet and approved operating conditions for the selected part number.
| Product type | Mini nylon automotive blade fuse |
|---|---|
| Catalog series | ADMIN-NL1 |
| Current ratings | 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A and 30A |
| Voltage rating | 32V DC |
| Breaking capacity | 1,000A at 32V DC |
| Catalog operating temperature | -40°C to +200°C; confirm the approved limit for the ordered variant |
| Terminal material | Silver-plated zinc alloy |
| Housing material | Nylon |
| Cold resistance tolerance | ±20%; catalog reference values |
| Catalog standards references | SAE J2077, ISO 8820 and UL 248 special-purpose fuses |
Request applicable certification documents and scope for the exact part. Catalog standards references and recognition marks do not replace product-specific documentation.
Available Ratings, Colors and Cold Resistance
Cold resistance is a catalog reference value with ±20% tolerance. Use the part number and amperage specification when ordering.
| Catalog number | Current | Voltage | Cold resistance ±20% | Housing color |
|---|---|---|---|---|
| ADMIN-NL1-01 | 1A | 32V | 77.0 mΩ | Black |
| ADMIN-NL1-02 | 2A | 32V | 36.0 mΩ | Gray |
| ADMIN-NL1-03 | 3A | 32V | 32.0 mΩ | Purple |
| ADMIN-NL1-05 | 5A | 32V | 17.0 mΩ | Tan |
| ADMIN-NL1-7.5 | 7.5A | 32V | 10.58 mΩ | Brown |
| ADMIN-NL1-10 | 10A | 32V | 7.82 mΩ | Red |
| ADMIN-NL1-15 | 15A | 32V | 5.1 mΩ | Blue |
| ADMIN-NL1-20 | 20A | 32V | 3.45 mΩ | Yellow |
| ADMIN-NL1-25 | 25A | 32V | 2.8 mΩ | Clear |
| ADMIN-NL1-30 | 30A | 32V | 2.25 mΩ | Green |
Mini Nylon Blade Fuse Dimensions
| Housing width | 11.13 mm |
|---|---|
| Housing height | 8.8 mm |
| Blade extension below housing | 7.5 mm |
| Body thickness | 3.8 mm |
| Outside blade span | 10.70 mm |
| Individual blade width | 2.8 mm |
| Blade thickness | 0.80 mm |
| Catalog drawing tolerance | ±0.2 mm |
Catalog Drawing and Curves
Open the original catalog for the product photograph, dimensional drawing and time-current curves.
Select the image to view the original catalog sheet.
Time-Current Opening Characteristics
The opening-time limits below follow the supplied catalog. Coordinate the fuse with wiring protection requirements and normal load conditions.
| Current (% of rating) | Minimum opening time | Maximum opening time |
|---|---|---|
| 110% | 4 hours | Not specified |
| 135% | 0.75 seconds | 10 minutes |
| 200% | 0.15 seconds | 5 seconds |
| 350% | 0.080 seconds | 0.250 seconds |
| 600% | 0.030 seconds | 0.100 seconds |
Request the current specification and test conditions for final circuit evaluation.
Common Applications
Compact Vehicle Fuse Panels
Panels designed for the specified mini blade footprint.
Vehicle Accessory Circuits
Compatible low-voltage DC loads with coordinated conductor and fuse ratings.
Workshop Replacement Stock
Rating assortments for correctly specified vehicle repairs.
OEM Assembly
Samples and bulk supply for validated fuse-holder designs.
How to Replace a Mini Nylon Blade Fuse
- Isolate power. Follow the vehicle or equipment service procedure.
- Investigate the fault. Identify why the original fuse opened.
- Match the specification. Check amperage, voltage and the exact mini footprint.
- Inspect the holder. Check for corrosion, loose contacts or overheating.
- Install and test. Seat the specified fuse and verify normal operation.
Information for an RFQ
- ADMIN-NL1 part numbers and quantities per rating
- Holder drawing or sample requirements
- Operating temperature and circuit conditions
- Required compliance documentation
- Packaging, labeling and delivery destination
Mini Nylon Blade Fuse Frequently Asked Questions
Which current ratings are available?
The catalog lists ten ratings: 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A and 30A.
Can this replace a standard-size nylon fuse?
Not directly. The mini housing is 11.13 mm wide, compared with the larger standard-size format. Match the holder and specified fuse type.
Is this a low-profile flat-foot fuse?
No. This mini design has projecting tapered blades. Compare the dimensional drawing with the required footprint.
What is the voltage rating?
The catalog specifies 32V DC and a breaking capacity of 1,000A at 32V DC.
What materials are used?
The catalog lists a nylon housing and silver-plated zinc-alloy terminals.
Can I request samples and rating assortments?
Send TONFUL your amperage mix, quantities, documents and packaging requirements for a quotation.
Source Mini Nylon Blade Fuses from TONFUL
Send your current-rating mix, holder requirements and order quantity to request ADMIN-NL1 samples and pricing.